How To Change Fuel Injectors 05 Bmw X3 3.0
put all files:
-> Folder "Assets"
-> File "DonnerTech_ECU_Mod.dll"
into your Mods folder
confirm if you are asked if you want to override (ever do this when updating modernistic as files might change)
Y'all take to follow everything listed beneath.
1. You are non allowed to share this mod in your savegame or anything else like your own mods.
2. You are not allowed to earn coin with this mod.
This does not include youtube ads or ads shown on for example your website that promotes my mod (without sharing the file)
3. You are non allowed to change or change this mod in any manner.
iv. You are non immune to employ assets included with this mod for annihilation else except usage for this mod itself.
v. You are not immune to "sell" this mod as your own.
6. You are not allowed to share savegames of this mod.
7. You are not allowed to redistribute whatever of the files from this mod.
This includes the dll file (the main mod)
The avails
This does not include config files. These tin can exist shared.
8. You are not immune to use link shortenes of whatever type when linking to this mod.
9. You are allowed to share my mod in videos, prototype or text form.
10. You lot are required to link to the original source which has to be at least 1 of the below:
- racedepartment link to the mod overview page
- nexus..mods link to the mods overview page
*Sharing config files found under Modernistic Settings is fine and obviously needed for a savegame
Discover [1]:
If you make a video most my mod I would appreciate you mentioning it in the clarification
if you lot have usefull videos (similar practiced installation videos) let me know and I can add them to the overview for people (I need permission of the video maker)
NOTICE [2]:
Delight note that i often don't update the images on the overview.
It can also happen that information of the latest update is not in the overview. If you lot are unsure what inverse. Please read the updates page.
- ABS module
- ESP module
- TCS module
- Cable harness
- Mounting plate
- Cruise command panel
- Smart engine module
- ECU info console
- Contrary camera (for info panel)
- Fuel injection:
- Manifold
- Throttle bodies
- Injectors
- Programmer
- Programmable chips
- Electric fuel pump
- Fuel pump cover plate (covers the hole of the original pump)
- Rain & Light sensorboard
- ABS
- ESP
- TCS
- Cruise command
- smart engine module (ALS, 2Step RevLimiter, fuel injection chip)
- Position reset button for not installed parts in Modernistic Settings
- ECU Infopanel: A Display that replaces the complete dashboard. More data in the spoiler below.
- Fuel injection (fuel map, start assist)
- Reverse camera when installed and using the info console will show a reversing view
- Rain & Light sensors
This is something new.
This replaces the old carburator system with a full fuel injection organization.
This includes electric throttle bodies, electric fuel pump, injectors, fuel rail and some other parts + more parts at some point (maybe).
- Remove racing carb (or whatever other carb)
- Remove fuel pump
- Remove electrics
- Remove distributor
- Install fuel injection manifold where the racing carb was
- (unpack them from the box before) Install the injectors into the small holes on the manifold (ane - iv)
- Install the fuel runway ontop of the injectors
- (unpack them from the box before) Install throttle bodies (ane - iv)
- install the new electric fuel pump behind the new manifold on the right side of the fire wall.
- Install the fuel pump cover plate that goes where the original fuel pump was installed
If everything is installed 100% red wires volition show up.
- Next take on of your programmable chips and the programmer itself.
- Adjacent hold the chip onto the developer center (~ the screen center) and install (like whatever other part)
- The chip will be installed on the slot of the programmer.
- Aim at the programmer. Text will appear letting you know what to press to do what...
- When the ui is opened. Start programming your fuel map. Skillful luck
- When washed (don't forget spark timing) printing write bit... If everything is good (if non errors will be shown) below the map tabular array.
- If writing was successful the ui will shut and the chip is placed on pinnacle of the programmer.
- Have the chip and insert it into the smart engine ecu module below the passenger seat.
- Your auto should now outset upward (depending on your fuel map it might non run well/ at all only it should atleast start for a short time.
- Repeat programming to get a perfect map
Just some examples:
Y'all tin tune the car to have good low rpm torque for overnice acceleration from a get-go (or in a rally in corners)
Or tune it to take more than ability at the loftier rpms (lean mixture).
Proficient luck.
fuel map are stored in the fuelMap binder of the mods config binder.
Fuel injection installed 2
The programmer
The programmer ui
- The info console is a large screen fitted infront of the original dashboard meters.
- It replaces all of them including
- high/low beam indicator
- rpm needle.
- km/h brandish (goes higher up 250km/h)
- Blinker left/right indicator
- Adds gear indicator
- Adds calculated l/km and km left based on that
- Adds a folio for the turbocharger mod showing values of the turbo (like force per unit area)
- Has several different pages switchable using the pointer keys on the panel ("Employ" key or mouse left) or KeyBindings
- Carb autoTune for ECO and Race (will accommodate the rockershafts to the optimal value and then adjust the carb either best for fuel saving (lean) or best performance (rich)
- Condition folio: some information most the status like oil quality
- Wear page: will brandish the ~ habiliment showing in "Adept" "Warning" or "Danger"
- Several ajustable values (non saved) like rev limiter rpm.
- Contrary camera view
The archive includes the gimp files for all images used on the panel.
You can alter them and replace them ingame past renaming them and adding "OVERRIDE_" infront of them
example: assistance_page.png => OVERRIDE_assistance_page.png
and and so placing them into your assets folder of the ecu modernistic.
PARTS have to exist installed in right order, otherwise no install message will be shown
-> outset Mounting plate! then everything else as you wish
Most parts have to be screwed in. To spiral them in have the right spanner/ratchet in paw and aim at the spiral. When it turns green you lot can screw it in like any other spiral.
Prices:
- ABS: 800
- ESP: 1200
- TCS: 1800
- Smart engine: 4600
- Cable Harness: 300
- Mounting Plate: 100
- Cruise control (includes control logic): 2000
- ECU info panel: 4000
- Pelting & Light sensorboard: yard
- Reverse camera: 1500
- Fuel injectors (box with 4x part): 800
- Throttle bodies (box with 4x part): 1200
- Fuel pump cover: 120
- Fuel injection manifold: 1600
- Fuel rail: 375
- Scrap programmer: 3799
- Electric fuel pump: 500
- Mounting plate below passenger seat
- All modules and cable harness ontop of it
- Cruise control panel below air fuel ratio
- ECU info panel behind the steering wheel, in forepart of dashboard meters
- Fuel injection:
- Fuel injection manifold replaces racing carb
- Throttle bodies and injectors go onto new manifold
- Fuel pump cover plate replaces original fuel pump
- Electrical fuel pump behind fuel injection manifold a scrap to the right on the firewall.
- Fuel track on top of injectors.
ABS: will make breaking (not HANDBRAKE) easier/safer
ESP: will aid with holding the car in a directly line
-> to exist more precise: car volition follow your commands better
TCS: will prevent tire slip (slower acceleration)
2StepRevLimiter/Launch Command
(smart engine controller):
enable and accelerate while standing (will disable while driving automaticly.
Engine rpm will stay at the set speed (default 6500)
Agree SPACEBAR (Handbrake) and go into first gear
when ready to launch let get of Handbrake...
Car will become forward FAST!!!! with max torque
(best to be used without TCS and with ABS and best tyres)
- For the cruise control to work:
- mounting plate has to exist installed and screwed in
- cable harness has to be installed.
- smart engine module has to be installed and screwed in
- prowl command panel has to be installed
- electricity has to exist on
- You demand to set a speed equal or above 20km/h
- You as well have to bulldoze atleast 20km/h or information technology won't enable.
- If you press the brake, clutch or handbrake it will be disabled.
Cruise command console:
ECU info panel:
Both command panels installed:
Contrary camera:
Rain & Light sensors:
Modernistic settings:
If you take ideas, suggestion, found a issues or anything else allow me know.
Latest updates
-
Tiny console fix
Brand sure to update MscModApi to version >= 1.0.4 which also fixes this mod's loading issue... -
Chips & Store fix
In a previous update I changed a value that gets saved for the chip from "chipProgrammed" to... -
Bit programming fix
Changelog (v1.5.v): Gear up issue preventing you from installing a freshly bought scrap on the...
Latest reviews
- john baklava
- Version: 1.5.7
- rosagay
- Version: 1.5.vii
- george goody
- Version: one.v.seven
- FEHAN
- Version: 1.v.seven
Please aid me
- Riffa335
- Version: 1.5.vii
- Radbro33
- Version: ane.five.7
- Abborren
- Version: ane.5.7
- binigus
- Version: 1.5.7
- ande332
- Version: 1.5.7
- Mackamo
- Version: i.5.7
- cases
- Version: one.5.7
- evcwliajf
- Version: 1.5.7
- snowynate
- Version: 1.5.7
- SHREKBIG
- Version: 1.5.7
- MisterRedLow
- Version: 1.five.7
- hörlurar
- Version: 1.v.5
Source: https://www.racedepartment.com/downloads/donnertechracing-ecus.31217/
Posted by: applegategallembey.blogspot.com
0 Response to "How To Change Fuel Injectors 05 Bmw X3 3.0"
Post a Comment