How To Change Moen Kitchen Faucet Cartridge

How to Replace a Kitchen Faucet

Kitchen faucets are probably 1 of the about used fixtures in homes. Many times a twenty-four hour period the water is turned on and off, leading to quite a fleck of wear and tear on this hardworking fixture. If your faucet has seen meliorate days, or is out of style, you tin can replace it with a shiny new version using just a few tools. Exchanging your sometime kitchen faucet with a new one can transform the look and functionality of your kitchen in just a couple of hours.

Tools y'all'll Need

Take all the necessary tools for this DIY project lined up before you commencement to salvage yourself time and frustration.

New Faucet
Channel locking pliers
Basin wrench
Plumber'southward Putty
Adjustable Wrench
Flexible supply lines
Record Mensurate

Before Starting

Turn off the hot and cold h2o shut-off valves. they're usually located in the cabinet that's nether the sink. Then open up upwards the faucet to relieve pressure.

Removing the Sometime Faucet

Stride One: Using an adjustable wrench and a pair of channel locking pliers, disconnect both the water lines from the faucet. If the supply lines are old, or the gaskets are worn out, you may desire to replace them with flexible supply lines.
Footstep Ii: Using a socket wrench or basin wrench remove the nut that is belongings the faucet tailpiece assembly in identify. Sometimes it'southward difficult to loosen quondam faucet nuts, in that case try soaking the threads with penetrating oil and attempt again.
Step Three: If your sink has a line that connects the hose to the faucet you tin disconnect this.
Pace Four: Pull the old faucet out and make clean the sink'southward surface making certain to remove whatever rust or caked on debris.

Installing the New Faucet

Step I: Using the measuring tape, measure out the distance, from center to center, of the outside holes of your sink. This is to make sure the new faucet volition fit. Since all faucets are slightly different, read any installation instructions that come with your new faucet. Follow all manufacturer's pre-assembly instructions and place the optional flange over the faucet opening.
Step Ii: Seal the new faucet. If you're using a gasket, place the gasket on the lip of the plate and thread the hoses through. If using plumber's putty, apply information technology effectually the base of the faucet and prepare the faucet in place.
Step Three: Under the sink you tin now thread on the flange and nut using a socket or basin wrench.
Step Four: If yous're using pull-out faucets, a weight needs to be added that will retract the pull-out spray.
Step Five: Now it's time to attach the supply lines to the faucet and so to the close-off valves. Cold water connects on the correct and hot water on the left.
Step Vi: Turn on the h2o and check for leaking. If you lot notice any leaks y'all'll need to tighten the connections on the water supply line.